Attero Tech unHX2D Dante/AES67 HDMI音訊解嵌器/嵌入器

Attero Tech unHX2D Dante/AES67 enabled HDMI Audio De-Embedder/Embedder
The Attero Tech unHX2D is a Dante™ enabled HDMI de-embedder/embedder designed to bridge 2-channel PCM HDMI audio to/from a Dante™/AES67 audio network. In addition, the unHX2D includes two line level analog inputs and outputs that can be independently bridged to/from a Dante™/AES67 audio network. An adjustable audio delay buffer is included on the Dante™ output for audio and video lip sync. The unHX2D features flexible audio routing between system input sources and outputs, and facilitates bridging audio from either video sources or monitors to a Dante™/AES67 network. The HDMI output operates as a pass thru repeater of HDMI input video source. The unHX2D also includes installer adjustable EDID management settings via software.
Features:
HDMI 2.0 compliant (HDCP 2.2) pass-through support for up to 4K/60/4:4:4 video, 2 channel PCM audio
Highly configurable routing between system inputs and outputs allow PCM HDMI audio from both HDMI sources and monitors to be bridged over the Dante network
170ms of adjustable lip sync delay on the Dante TX 1-2 audio output path
Installer adjustable EDID management settings via software
Powered by either IEEE 802.3af PoE or a +24VDC from an external supply
Supports Dante and AES67
 
Specifications:
Analog Audio Inputs
Input Type Balanced 3-pin line level
Input Sensitivity -10dBV (consumer) or +4dBu (Pro) software selectable
Input Impedance 10 kΩ
Maximum Input Levels +20 dBu (+/- 0.5 dB) @ +4dBu Input Sensitivity, +10 dBV (+/- 0.5 dB) @ -10 dBV Input Sensitivity
THD+N < 0.005 %
Dynamic Range > 105 dB

Analog Audio Outputs
Output Type: Balanced 3-pin line level
Output Impedance: 200 Ohms Balanced
Maximum output level: +20 dBu (+/- 0.5 dB)
THD+N: < 0.005 %
Dynamic Range: > 105 dB

S/PDIF Audio Inputs
Supported Formats: S/PDIF ( IEC-60598) 2 CH PCM, 24bit
Supported Sample Rates: 44.1 kHz, 48 kHz, 88.2kHz, 96 kHz, 192 kHz
THD+N: < 0.005 %

S/PDIF Audio Output (Mirrors HDMI Input Audio)
Supported Formats: S/PDIF ( IEC-60598) 2 CH PCM, 24bit
Compressed Multi-channel in Pass Through mode
Supported Sample Rates: 44.1 kHz, 48 kHz, 88.2kHz, 96 kHz, 192 kHz
THD+N: < 0.005 %

HDMI Audio Inputs
Supported Formats: 2 CH PCM, 24bit
Supported Sample Rates: 44.1 kHz, 48 kHz, 88.2kHz, 96 kHz, 192 kHz
THD+N: < 0.005 %

HDMI Audio Output
Supported Formats: 2 CH PCM, 24bit Compressed Multi-channel in Pass Through mode
Supported Sample Rates: 44.1 kHz, 48 kHz, 88.2kHz, 96 kHz, 192 kHz
THD+N: < 0.005 %

Video Specifications
HDCP: V2.2
HDMI: V2.0
Supported Resolutions
4096×2160p@23.98,24/25/29.97,30/50/59.97,60Hz
3840×2160p@23.98,24/25/29.97,30/50/59.97,60Hz (UHD)
2048x1080p,1080p@23.98/24/25/29.97/30/50/59.94/60Hz
1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i
3D Support
Color Space: YUV, RGB
Chroma Subsampling: 4:4:4, 4:2:2, 4:2:0
Max Color Depth: 48 bit
EDID SW Configurable
Hot Plug Detect SW Configurable
Bandwidth: 18 Gbps (600 MHz)
Connectors: HDMI Type A

Dante Network
Physical Layer: Ethernet
Connector: Single RJ-45
Cable Quality: CAT-5e or better
Transmission Speed: 100 Mbps
Supported Sample Rates: 48kHz
Minimum Dante Network Latency: 1ms

Power Requirements
PoE 802.3af PoE PD compliant
Power Consumption: < 7.6W Max
Cable Quality: CAT-5e or better

Physical Dimensions
Width: 9.19"
Height: 1.06"
Depth: 4.0"
Weight: 1.3lbs

Product Compliance
FCC CFR 47 Parts 15B Class A, EN55011, ICES-003, CE (EN55022 / EN55024), RoHS, REACH
 
Warranty:
5 Year